SMPS for CCTV

5 amp smps
USE FOR CAMERA, PELTIER KIT

Input Voltage: AC 100 - 264V 50 / 60Hz
Output Voltage: 12V DC, 5A, and 60W
Output voltage: Adjustment Eange: ±20%
Protections: Overload / Over Voltage / Short Circuit
Auto-Recovery After Protection
Universal AC input / Full range
100% Full Load Burn-in Test
Cooling by Free Air Convection
High Quality and High Performance
LED power supply with a metal body for hidden installation for LED lighting
Design with Built-in EMI Filter, improve signal precision.
No Minimum Load.
Compact Size Light Weight.
High Efficiency, Reliabiltiy & low energy consumption
Category: Switch Mode Power Adaptor (SMPS)
MTBF >50,000 hours
Output Type: DC
Output: 12Volts 5Amp
Shell Material: Metal Case / Aluminum Base
Color: Sliver
IN-DOOR USE ONLY!

10 amp smps
USE FOR CAMERA, PELTIER KIT

Input Voltage: AC 100 - 264V 50 / 60Hz
Output Voltage: 12V DC, 10A, and 120W
Output voltage: Adjustment Eange: ±20%
Protections: Overload / Over Voltage / Short Circuit
Auto-Recovery After Protection
Universal AC input / Full range
100% Full Load Burn-in Test
Cooling by Free Air Convection
High Quality and High Performance
LED power supply with a metal body for hidden installation for LED lighting
Design with Built-in EMI Filter, improve signal precision.
No Minimum Load.
Compact Size Light Weight.
High Efficiency, Reliabiltiy & low energy consumption
Category: Switch Mode Power Adaptor (SMPS)
MTBF >50,000 hours
Output Type: DC
Output: 12Volts 10Amp
Shell Material: Metal Case / Aluminum Base
Color: Sliver
IN-DOOR USE ONLY!

 

20 amp smps
USE FOR CAMERA, PELTIER KIT

Input Voltage: AC 100 - 264V 50 / 60Hz
Output Voltage: 12V DC, 20A, and 240W
Output voltage: Adjustment Eange: ±20%
Protections: Overload / Over Voltage / Short Circuit
Auto-Recovery After Protection
Universal AC input / Full range
100% Full Load Burn-in Test
Cooling by Free Air Convection
High Quality and High Performance
LED power supply with a metal body for hidden installation for LED lighting
Design with Built-in EMI Filter, improve signal precision.
No Minimum Load.
Compact Size Light Weight.
High Efficiency, Reliabiltiy & low energy consumption
Category: Switch Mode Power Adaptor (SMPS)
MTBF >50,000 hours
Output Type: DC
Output: 12Volts 10Amp
Shell Material: Metal Case / Aluminum Base
Color: Sliver
IN-DOOR USE ONLY!

Appliction: Applicable to all kinds of CCTV products operate at 12V DC power and other load matching electronic devices

Installation Method: See product Installation Diagram

Storage Condition: Normal temperature, away from moist and sunshine

Cautions:

1) The vacuum plastic film must be taken away before installation and use.

2) Please ensure that there is sufficient space for heat dissipation (vertical installation suggested) and make sure that wind path of the cooling fan is not blocked, so that it can work properly

3) Put the CCTV power supply in dry place.

4) Ensure that screws and wires are tightened while making connections.

5) 10-30% allowance should be retained according to ambient temperature: overtoad and improper use are prohibited

6) The wire length less than 5 meters between CCTV power supply and module is strongly recommended, to avoid voltage reducing and brightness reducing

7) Please stop using immediately if quality problems occur, and contact with supplier directly in time. Wel handle it according to our warranty policy, we are not responsible for any collateral loss

8) We are not responsible for any loss caused by improper use or man-made damage.

9) Earthing is mandatory for CCTV power supply

Note: The warranty sme period may vary as per company policy.